Madden Accident Analysis, Investigation, Reconstruction - Slips, Trips & Falls, Premises Accidents, Premises Liability
  • single-family and multiple-family residences, including apartment buildings 
  • retail stores 
  • warehouses 
  • industrial and manufacturing facilities 
  • auditoriums, churches 
  • restaurants and lounges 
  • outdoor facilities: parking lots, sidewalks, roadways, lawns  
Our work in this area generally covers building and property physical features and characteristics associated with hazards, such as: 
  • whether buildings and properties were defective in design in regard to safety
  • whether buildings and properties conformed with: 
Our reconstruction of premises accidents determines whether building and property features and/or conditions caused or contributed to the accident, including those accidents commonly called slips and falls and trips and falls. Our work in this area includes determining whether revision of the facilities was required for safety. 
  • glass doors and panels 
  • windows and window assemblies 
  • interior and exterior steps, stairs and ramps, and their handrails and guardrails
  • passenger and freight elevators and lifts used as passenger elevators
  • interior and exterior balconies 
  • floors 
  • roofs 
  • sidewalks, parking lots, and other exterior walking surfaces 
  • features and fixtures nearby, on, or within the above features and fixtures
  • stairs
  • ramps, including ADA ramps (or the lack of ADA ramps where required) 
  • potentially inadequate slip-resistance of surfaces 
  • potential trip hazards 
  • potentially inadequately guarded openings and elevated edges of floors (with drops to lower floors)
  • potentially inadequate warnings of hazards.
  • ice potentially unnaturally present
  • ice and snow present from potential inadequate maintenance
  • appropriate accepted engineering practices 
  • standards, regulations and codes
  • especially state and federal building codes and requirements 
  • including ADA requirements
Our analyses are performed to determine: 
took 8 college courses in physics and engineering mechanics, the scientific bases for reconstruction of slips, trips and falls
Buildings and properties have similar features associated with these safety issues, which we analyze based on accepted engineering and safety principles for the use of buildings and properties.  
  click on underlined words to use links - if no word is underlined try hovering the mouse over words to see underlines
  Experience and Qualifications of James D. Madden, P.E. in regard to Premises - 
      Accidents, Building and Property Safety, Slips and Falls, Trips and Falls, and Falls 
      from Heights, with potential fall-protection issues
over 175 incidents involving premises issues, have been investigated, analyzed and reconstructed as part of the forensic engineering work during over the last 30 years, including potential building defects, slips and falls, trips and falls, and falls from heights with potential fall-protection issues 
See details of this work on the Engineering Design page and the Employment History page.
  attended engineering seminars presented by the National Academy of Forensic Engineers
  over 45 years of engineering experience, with: 
  17 years experience in industrial operations, engineering design and construction assistance 
  over 30 years experience in forensic engineering, including:  
  working on over 1100 cases
  issuing over 700 reports and over 70 affidavits
  testifying in over 100 depositions and over 90 trials
See details of the pre-forensic work on the Employment Page and the Engineering Design Page.
See details of the forensic work throughout this website, and a summary on the Employment Page.
See more about qualifications of  James D. Madden, P.E. on the Qualifications Page.
  designed facilities and analyzed facilities for safety during 15 years of working in design engineering
  Examples of facilities that we have analyzed    
                                                                        ●  see examples of fixtures and features in next section below
  Examples of features and fixtures that we have analyzed   
                                                                                                    ●  see examples of facilities in next section above
  Our Engineering Analysis and Reconstruction of Premises Accidents,
  including Slips and Falls, Trips and Falls, and Falls from Heights
regularly attend additional technical courses and seminars each year to meet the requirements for continuing engineering education for the Professional Engineer's license
  
earned 2 Engineering degrees, Bachelor of Science and Master of Engineering, and took additional post-degree coursework, with coursework in physics, chemistry, mathematics, engineering mechanics, mechanical engineering, chemical engineering and normal psychology
at the start of forensic work, completed refresher and additional post-degree college credit coursework and continuing education coursework in mechanical engineering, metallurgy and materials
earned the Professional Engineers license (P.E.) by taking the National Council of Engineering Examiners' (NCEE) examination in Fundamentals of Engineering and the Mechanical Engineering and Chemical Engineering sections of the NCEE examination in Principles and Practices of Engineering
designated a Diplomate Forensic Engineer by the National Academy of Forensic Engineers in accordance with the standards of the Council of Engineering and Scientific Specialty Boards (CESB)
  
  
  
  
  
  
<< click for a description of the typical activities and work performed
<< click for examples of Facilities analyzed
<< click for examples of Features and Fixtures analyzed
Our reconstruction also includes determining whether it was a slip and fall or a trip and fall that was involved in the accident, when it was one or the other. Slips and falls are different mechanically and dynamically from trips and falls. Falls from heights may have some or the same mechanical and dynamic features of slips and falls or trips and falls. However, in other circumstances, especially with failure of support under the person, falls from heights have characteristics largely different from those of slips and falls and trips and falls.
Our Work with Premises Accidents - includes investigation and reconstruction of slips and falls, trips and falls, and falls from heights, and investigation and engineering analysis of building and property characteristics and features associated with potential hazards, such as stairs, ramps and walking surfaces. This work includes assessing slip-resistance, guarding of openings and edges, potential inadequate warnings of hazards and potential trip hazards. 
Our work includes assessment of the movements and potential observations of the person in a premises accident and adherence to applicable codes, standards and recommended practices, particularly building codes, including the ADA (Americans with Disabilities Act) Accessibility Guidelines for Buildings and Facilities.
^^^ click on buttons to go to other pages covering these subjects  ^^^
Premises Accidents - Table of Contents - links to content on this page
Premises Accidents, including Slips, Trips and Falls, and Falls from Heights
Consultation is available before starting a case. We invite you to
consult with us. There is no charge for an initial phone consultation.
Call us, or if you prefer we can schedule the consultation in advance.
Consultation with James D. Madden, PE, a Professional Engineer, and Forensic
Engineering Consulting and Testifying Expert Witness, is available to the client at all
times during the work - before, during, and after the investigation,
engineering analysis, reconstruction, report, and any other work on the case.
Phone: (440) 838-1191
The qualifications of James D. Madden, P.E., Senior Forensic Engineer, Consulting and Testifying
Forensic Engineer and Accident Reconstruction Engineer, are listed on the Qualifications and Forensic Specialties pages.  
Download a Summary or Detailed Curriculum Vitae (CV) / Resume' for James D. Madden, P.E.,
email us, and bookmark this website. 
  Qualifications of James D. Madden, P.E., Senior Forensic Engineer
  Downloads and Links -  Curriculum Vitae, Email and Bookmark
For mailing addressphonefax and email address click a button below the Fee Schedule section.
Contact us by phone, fax, mail or email for a copy of the Fee Schedule for charges for engineering
and consulting services and testimony.  Click a button below for contact information.
  Contact information
  Fee Schedule
Phone: (440) 838-1191
Over the last 30 years we have regularly worked on accidents which occurred in Ohio, Pennsylvania, Michigan, New York and nearby, including inspections of accident sites, equipment, and facilities, with reports and testimony. During these 30 years we have also worked on accidents which occurred in other states, and equipment and facilities located in other states, with inspections of accident sites, equipment, and facilities, from Utah and Kansas to Vermont and North Carolina, with reports and testimony for these accidents, when applicable.
  Geographic Area of Practice - North America 
Contact us to discuss your case by phone at NO CHARGE
This consultation can be scheduled in advance to meet your schedule.
  verbal reports, by telephone or in face-to-face conferences
We present the results of our investigations, engineering analyses and reconstructions in 
the client's choice of any, or all, of the following: 
  Presentation of results of our work
For more on qualifications see the Qualifications Page<<< Click on the underlined text
Our work investigating, analyzing and reconstructing accidents, and presenting the results, may include any 
or all of the following, depending on the needs of the case: 
  Our Typical Work Activities and Products, when warranted by the case
  written reports and affidavits
  deposition testimony, including video deposition
  trial testimony and arbitration testimony
James D. Madden, P.E., while performing Forensic Engineering work full-time for over 
the last 30 years, for both plaintiff and defendant, has to date:
  Forensic Engineering Work by Senior Forensic Engineer James D. Madden, P.E. 
  completed over 1100 cases
  written and issued over 700 reports                  
  testified in over 100 depositions
  written and issued over 70 affidavits
  testified in over 90 trials                               
Use the Search Box at the left to search the whole website.  
Use Control F, 'Ctrl' + 'F', to locate specific words on this page.
Bookmark this site by typing Control D ('Ctr' + 'D'). 
  Other Experience & Qualifications
  Curriculum Vitae, CV, Resume'
  Contact Us by Phone, Mail or Email 
  Consult, before and after assignment
  Our Forensic Engineering Work - number of  ● Cases  ● Reports  ● Affidavits  ● Testimonies  
  Engineering Analysis of Premises Accidents 
  Qualifications in regard to Premises Accidents 
  Our Typical Work Activities and Products
  Presentation of The Results of Our Work
  Fee Schedule Availability
​■  Geographic Area available for Work
  Links to Other Pages (left sidebars)
  Our Work with Premises Accidents
  Examples of Facilities Analyzed
  Examples of Fixtures Analyzed
  Examples of Features Analyzed
Premises Accidents, including Slips, Trips and Falls, and Falls from Heights
      click on the underlined squares and underlined words to link to the subjects
  inspection of the accident site, such as a roadway, outdoor facilities, building or industrial facilities
inspection of the involved equipment, in current condition, including in damaged condition (such as crashed vehicles); and when available for operation, during operation (such as industrial equipment)
  interviewing witnesses (often during the inspection of the accident site, product and/or equipment)
coordinating or interfacing with others while they are preparing specialized exhibits such as video animations and videos of demonstrations
review and study of case documents, evidence and applicable codes, standards, regulations and recommended practices
  written reports and affidavits, and exhibits
drawings, calculations, graphical analyses, computer analyses, etc. as required to analyze and reconstruct the accident, and to present the engineering analysis and reconstruction
  testing accident items and exemplar items (such as consumer products)
  photography and/or video of the accident site and involved equipment
  testimony in deposition, trial and arbitration
  
  
  
  
over 30 Years Investigating, Analyzing, Reconstructing & Testifying about Accidents
Contact us at  440-838-0640 or ▪ 440-832-9540 or  [email protected]
Forensic Engineering & Scientific Accident Reconstruction
Links to Specialty Pages
Page Links 
Links to General Pages

about Sr Forensic Engineer


Main General Pages


Basic Forensic Specialties
Main Forensic Specialties
click on items below 
click on items below 
Link to Premises Accident Website 
click on item below
Website opens in a browser tab next to the tab for this page
Phone: (440) 838-1191
Madden Accident Analysis, Investigation, Reconstruction
MAAIR
Madden
Accident
Analysis,  
Investigation,
Reconstruction
MAAIR
Copyright 2011, 2012, 2015, 2016, 2018, 2019, 2020, 2022 by Madden Accident Analysis, Investigation, Reconstruction, and by James D. Madden, P.E. All rights reserved.
This website contains photographs which are licensed with restrictions that prohibit downloading, reproduction, re-publication or re-transmission.
Madden Accident Analysis, Investigation, Reconstruction, through its Senior Forensic Engineer, James D. Madden, P.E., a licensed Professional Engineer, and Board Certified Diplomate Forensic Engineer, has performed Accident Investigations, Engineering Analyses and Accident Reconstructions routinely for accidents / incidents and cases located in Ohio, Pennsylvania, Michigan, and New York, in the technical areas which are noted in this website, as well as providing expert reports and testifying in court proceedings in these states in the capacity of an Expert Witness, including depositions, arbitrations and/or trials. Forensic Engineering work has also performed in, and/or for cases in, West Virginia, Kentucky, Indiana, Illinois, Maryland, North Carolina, Vermont, Kansas and Utah, with testimony in deposition and court in West Virginia and Kansas.
Madden Accident Analysis, Investigation, Reconstruction, through its Senior Forensic Engineer, James D. Madden, P.E., a licensed Professional Engineer, and Board Certified Diplomate Forensic Engineer, has performed Accident Investigations, Engineering Analyses and Accident Reconstructions for accidents / incidents and cases in the metropolitan areas of Cleveland, Akron, Canton, Toledo, Warren, Youngstown, Mansfield, Columbus, Dayton, Cincinnati, Lima, Findlay, Marietta and Steubenville, Ohio, as well elsewhere throughout Ohio, and the metropolitan areas of Pittsburgh and Erie, Pennsylvania, as well as elsewhere throughout western and central Pennsylvania, and the metropolitan areas of Detroit, Ann Arbor, Lansing, Flint and Port Huron, Michigan, as well as elsewhere in southern Michigan, and the metropolitan areas of Buffalo and Syracuse, New York, as well as elsewhere in western and central New York state. In many of these areas James D. Madden, P.E. has provided expert reports and testified in the capacity of an Expert Witness in court proceedings, including depositions, arbitrations and/or trials.  
Latest updates to the overall document and activity counts (reports, affidavits, cases, trials, and depositions), and counts of the number of individual specialty cases reported in this website were completed 7/15/2020. The updates of the overall document and activity counts and the counts of the number of individual specialty cases for the period between 12/2007 and 7/15/2020 were based only on the documents produced, and thus are under-counts (i.e. cases without a report or affidavit were not included in the counts).
Madden Accident Analysis, Investigation, Reconstruction
1700 West Market Street, Suite 318, Akron, Ohio 44313
or contact us for our Cleveland Ohio address
phone: 440-838-0640 or 440-832-9540, fax: 440-838-1192
email address: [email protected]

Madden Accident Analysis, Investigation, Reconstruction, through its Senior Forensic Engineer James D. Madden, P.E., is available for Accident Investigations, Engineering Analyses, Accident Reconstructions, and testimony in depositions, hearings, arbitrations, and trials, for cases located throughout North America.